Home >> Feeds Directory >> Fashion >> Jewelry >> Etsy Shop

Etsy Shop

Online Wedding Planning software


[CaRP] php_network_getaddresses: getaddrinfo failed: Name or service not known (0)
Etsy Shop for northwestgoods
Recent listings from northwestgoods
  • Metal hair slide or hair barrette by northwestgoods

    29.00 USD

    This is a nice larger sized hair barrette, hair slide, shawl pin, scarf pin in solid nickel silver and bronze with dot of copper. It is welded with nickel silver and the stick is nickel silver. These are great at holding hair with the twist and lock design. You just twist the stick a half turn to free it from the barrette. They adjust to any hair type and many people tell me these are the only things that stay tight in their hair. They are very sturdy and if there ever is a problem I guarantee my work as long as you own it.

    *Measurements*
    The barrette and stick measure 6 inches (15.2 cm) long and about 2 inches (5.1 cm) wide.

    I hand make each hair barrette so they are unique. This barrette is made and ready to ship. The one you see here is the one you will receive.

    To see more hair barrettes follow the link below:
    http://www.etsy.com/shop/northwestgoods?section_id=5214196

    *Hair Barrette Instructions*
    The barrette and stick are each slightly bent so they will fit tightly together. Twist the stick to release it from the barrette and pull it out. To fasten, place the barrette on top of your hair and slide the stick through the barrette so the curve of the stick is down (like a shallow ?u?) then twist the stick into place. You should hear it snap. If this is too tight, the barrette and stick are each adjustable. You can bend the barrette to have a slightly greater curve if needed.

    062613-5



  • Dangly bronze and silver earrings by northwestgoods

    16.00 USD

    Dangly bronze and sterling silver earrings with rounded rectangle and moon shapes. Both of the pieces are textured. They are on surgical steel ear wires that are hypoallergenic so they are much less likely to react with sensitive ears. All earrings also come with rubber backstops to keep the earrings from possibly slipping out of your ears.

    *Measurement*
    They measure almost 2 inches (5.1 cm) from the top of the earring to the bottom of the earring and about a half an inch (.5 cm) wide.

    To see more of my earring collection please follow the link below.
    http://www.etsy.com/shop/northwestgoods?section_id=5214194


    *Care*
    We do not coat our jewelry with any lacquer or other chemicals so the metals on this comb will tend to tarnish over time but can be polished up with any silver, brass, or copper cleaner. Also an old tooth brush and some toothpaste can do just as well. You can also just leave the piece alone and let the metals fade to softer tones.


    10252012



  • Metal Cuff Bracelet by northwestgoods

    27.00 USD

    Very simple yet elegantly designed metal cuff bracelet. I really like the space and clean look of this one. This one is made of bronze, copper, and nickel silver. These bracelets are bendable for a perfect fit. This one is a medium size. Each one is different so the one pictured here is the one you will receive.


    To browse more bracelets please follow the link below:
    http://www.etsy.com/shop/northwestgoods?section_id=5215094


    *Size and Fitting*
    This bracelet should fit a medium sized wrist. It measures 5.25 inches (13.3 cm) from end to end. They are very sturdy and can be adjusted for a perfect fit. They will not break by bending them.

    *Care*
    We do not coat our jewelry with any lacquer or other chemicals so the metals on this comb will tend to tarnish over time but can be polished up with any silver, brass, or copper cleaner. Also an old tooth brush and some toothpaste can do just as well. You can also just leave the bracelet alone and let the metals fade to softer tones.

    10252012



  • Tree Ornament / Christmas Tree Decoration by northwestgoods

    17.00 USD

    Christmas tree ornament. This one has the dangling star. These are great for gifts, gift exchanges, stocking stuffers and they also are easy to ship and travel very well. These Christmas tree ornaments are made of solid brass, copper, and nickel silver and have a clear lacquer coating. I hand make each ornament so the ones you receive will differ slightly from the ones pictured here but I will try to make them as close to the ones pictured as possible.

    Each ornament ships in its own little black cloth drawstring bag for safe keeping.

    I also sell them in sets of 3, 6, and 8 and you receive a discount when purchasing the sets. You can see the other designs and package deals at the ornaments section of my shop.
    http://www.etsy.com/shop/northwestgoods?section_id=5214200

    They measure 2 inches in diameter.



  • 3 piece dangly earrings with surgical steel ear wires by northwestgoods

    16.00 USD

    Nice 3 piece dangling earrings made out of a combination of copper, bronze, and sterling silver with purple bead. All pieces are hand made and hand textured. They are also on surgical steel ear wires and each come with little rubber back stops so they do not fall out.

    *Measurement*
    They measure 1.75 inches (4.4 cm) from the top of the earring to the bottom of the earring and 1/2 of an inch (1.3 cm) wide.

    To see more of my earring collection please follow the link below.
    http://www.etsy.com/shop/northwestgoods?section_id=5214194


    *Care*
    We do not coat our jewelry with any lacquer or other chemicals so the metals on this comb will tend to tarnish over time but can be polished up with any silver, brass, or copper cleaner. Also an old tooth brush and some toothpaste can do just as well. You can also just leave the piece alone and let the metals fade to softer tones.



  • Hair fork, hair stick, bronze, copper, nickel silver by northwestgoods

    29.00 USD

    Great looking metal hair fork or hair stick. These are a great looking functional way of holding your hair. This hair comb is made with brass, copper, and nickel silver. Nickel silver is a stiff metal alloy of copper, nickel, and zinc so it is quite sturdy. This hair comb has 5 tines. The ends of each tine have a weld of nickel to create smooth tips so you won't scratch your scalp. The comb has a gentle curve to it so it will fit snug against your head.

    *Measurements*
    Comb measures 5 inches (12.7 cm) long and 2.75 inches (7 cm) wide.

    I hand make each hair comb so they are unique. This comb is made and ready to ship. The one you see here is the one you will receive.

    To see more combs follow the link below:
    http://www.etsy.com/shop/northwestgoods?section_id=5243631

    *Hair Fork Operation*
    These work well at holding hair in a number of styles. This comb will securely hold hair in a French twist, a variety of buns, and a French roll.

    *Care*
    We do not coat our jewelry with lacquer or other chemicals so the metal in this comb will tarnish over time. The comb can be polished with silver, brass, or copper cleaner. An old toothbrush and toothpaste also polish the jewelry effectively. You may also leave the piece alone and allow the metals to achieve a patina.


    02232012



  • Metal Hair Barrette by northwestgoods

    29.00 USD

    Really cool medium to slightly smaller sized adjustable hair barrette made of solid nickel silver. The stick is also nickel silver. Nickel silver is a stiff metal alloy of copper, nickel, and zinc so it is quite sturdy. These barrettes are great at holding hair. Many people have told me these are the only things that actually stay in their hair. These also work very well as scarf pins and shawl pins.

    *Measurements*
    The barrette and stick measure 5.5 inches (14 cm) long and 2.5 inches (6.4 cm) wide.

    I hand make each hair barrette so they are unique. This barrette is made and ready to ship. The one you see here is the one you will receive.

    To see more hair barrettes follow the link below:
    http://www.etsy.com/shop/northwestgoods?section_id=5214196

    *Hair Barrette Instructions*
    The barrette and stick are each slightly bent so they will fit tightly together. Twist the stick to release it from the barrette and pull it out. To fasten, place the barrette on top of your hair and slide the stick through the barrette so the curve of the stick is down (like a shallow ?u?) then twist the stick into place. You should hear it snap. If this is too tight, the barrette and stick are each adjustable. You can bend the barrette to have a slightly greater curve if needed.

    10242011



  • Hair fork or hair comb hair accessory by northwestgoods

    29.00 USD

    This is a metal hair comb, stick, or fork made out of solid nickel silver and copper. This comb has six tines that will securely grip your hair. The tines are made from nickel silver which is a stiff metal alloy of copper, nickel, and zinc so it is quite sturdy. The ends of each tine have a smooth tip so they will not scratch your scalp. The tines are reinforced where they attach to the top of the comb for extra stability. The comb has a gentle curve to it so it will fit snug against your head.

    *Measurements*
    Comb measures 5.5" (14 cm) long and 3" (7.6 cm) wide.

    I hand make each hair comb so they are unique. This comb is made and ready to ship. The one you see here is the one you will receive.

    To see more combs follow the link below:
    http://www.etsy.com/shop/northwestgoods?section_id=5243631

    *Hair Fork Operation*
    These work well at holding hair in a number of styles. This comb will securely hold hair in a French twist, a variety of buns, and a French roll.

    *Care*
    We do not coat our jewelry with lacquer or other chemicals so the metal in this comb will tarnish over time. The comb can be polished with silver, brass, or copper cleaner. An old toothbrush and toothpaste also polish the jewelry effectively. You may also leave the piece alone and allow the metals to achieve a patina.

    10262013-4



  • Metal Hair Fork, comb, hair stick, hair accessory by northwestgoods

    29.00 USD

    This is a metal hair comb, fork, or stick hair accessory made out of solid nickel silver, copper, and bronze. This comb has five tines that will securely grip your hair. The tines are made from nickel silver which is a stiff metal alloy of copper, nickel, and zinc so it is quite sturdy. The ends of each tine have a smooth tip so they will not scratch your scalp. The tines are reinforced where they attach to the top of the comb for extra stability. The comb has a gentle curve to it so it will fit snug against your head.

    *Measurements*
    Comb measures 5" (12.7 cm) long and 2" (5.1 cm) wide.

    I hand make each hair comb so they are unique. This comb is made and ready to ship. The one you see here is the one you will receive.

    To see more combs follow the link below:
    http://www.etsy.com/shop/northwestgoods?section_id=5243631

    *Hair Fork Operation*
    These work well at holding hair in a number of styles. This comb will securely hold hair in a French twist, a variety of buns, and a French roll.

    *Care*
    We do not coat our jewelry with lacquer or other chemicals so the metal in this comb will tarnish over time. The comb can be polished with silver, brass, or copper cleaner. An old toothbrush and toothpaste also polish the jewelry effectively. You may also leave the piece alone and allow the metals to achieve a patina.

    062613-4



  • 3 piece dangly earrings with surgical steel ear wires by northwestgoods

    16.00 USD

    Nice 3 piece dangling earrings made out of a combination of copper, nickel silver, and sterling silver with red bead. All pieces are hand made and hand textured. They are also on surgical steel ear wires and each come with little rubber back stops so they do not fall out.

    *Measurement*
    They measure 1.5 inches (3.8 cm) from the top of the earring to the bottom of the earring and 1/2 of an inch (1.3 cm) wide.

    To see more of my earring collection please follow the link below.
    http://www.etsy.com/shop/northwestgoods?section_id=5214194


    *Care*
    We do not coat our jewelry with any lacquer or other chemicals so the metals on this comb will tend to tarnish over time but can be polished up with any silver, brass, or copper cleaner. Also an old tooth brush and some toothpaste can do just as well. You can also just leave the piece alone and let the metals fade to softer tones.




Newsfeed display by CaRP
Home  ::  RSS Feeds Directory  ::  RSS Feed Reader  ::  Add RSS Feed  ::  Sitemap

 

Send email or call Arun (+91-98310-27107) for Joint Ventures